Guest

Topic:Kt Kingtronics How to Bend or Cut Wires of Axial Lead Diodes
Content:
Kt Kingtronics shares you how to bend or cut wires of Axial Lead Diodes. There are several things that you should pay attention to. Please compare with the correct and wrong doing. Correct Wrong Fig.1: Before bending, the diode’s leads must be clamped completely to prevent stress inside the diode. Use the light grey plunger above When clamping and fixing Fig.1a: Here the diode is not clamped, the diode easy to move and the chip inside with pressured. Fig.2: Now the bending process begins. Only the wire which must be bent is unclamped, while the diode itself is fixed. Fig.2a: Now the bending process starts. The complete wire becomes stressed. Fig.3: The bending process is do
[<<][[1]][2][>>]

Browse comment(0)
Post comment



First page