Kingtronics Instructions for using aluminum electrolytic capacitors

22 Nov 2023

1. DC electrolytic capacitors can only be used on DC circuits, and their polarity must be marked in an appropriate position or next to the conductor/terminal.
2. If the polarity of the circuit is unclear or unclear in the circuit loop, it is recommended to use a non-polar electrolytic container.
3. The working environment temperature of electrolytic capacitors should not exceed the specified operating temperature range.
4. Electrolytic capacitors should be stored in low temperature and dry places. If the storage period is long, they should be re aged with rated voltage before using.
5. The ripple current passing through the electrolytic capacitor should not exceed its allowable range. If it exceeds the specified value, electrolytic capacitors with high ripple current resistance should be selected.
6. When in use, the working voltage of the electrolytic capacitor should not exceed its rated voltage.
7. High temperature heating devices such as electric soldering irons should be kept at an appropriate distance from the plastic shell of the electrolytic capacitor to prevent the plastic sleeve from cracking due to overheating.
8. When welding electrolytic capacitors, the welding time and temperature should not exceed 10 seconds and 260 degrees Celsius.
9. Applying excessive force to the guide pins and terminals will damage the internal structure of the electrolytic capacitor

Kingtronics Instructions for using aluminum electrolytic capacitors

0Commentary - Kingtronics Instructions for using aluminum electrolytic capacitors

Post comment

◎welcome to give out your point。

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
Skype: kingtronics.sales


Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download