The dc resistance between the input terminals with the wiper positioned to either end stop, or in dead band for continuous rotation potentiometers.


The resistance measured between the wiper terminal and each end terminal with the wiper positioned to give a minimum value.


The resistance measured between the wiper terminal and an end terminal when the wiper is positioned at the corresponding end of mechanical travel.
Absolute minimum resistance and end resistance are synonymous for continuous rotation trimmers.


The unit change in resistance per degree celsius change from a reference temperature, expressed in parts per million per degree celsius as follows:

R1 = Resistance at reference temperature in ohms
R2 = Resistance at test temperature in ohms
T1 = Reference temperature in degrees celsius
T2 = Test temperature in degrees Celsius

New Year is coming soon.Wish you have a wonderful holiday in advance.

Below hot sellers many buyers will buy for resale or stock before New Year. Do you have any demand for those? We will try our best to satisfy you well with competitive prices as per your request.

And we are on the stage of evaluating old distributors and develop more potential new distributors, do you have interests in being kingtronics distributor? 

RKT trimmer potentiometer3296 3006 3386 3266 3362 3329 3590S SMD C3305
TKT radial tantalum capacitors & MKT radial multilayer ceramic capacitors 

Transistor BC847A/B/C SOT-23 T&R RoHS 

Transistor BC807-16/25/40 SOT-23 T&R RoHS 

Switch diode BAV70 SOT-23 T&R RoHS 

Switch diode BAV99 SOT-23 T&R RoHS 

M7 DO-214AC T&R RoHS 

LL4148 LL-34 T&R RoHS

Dear Valued customers,

Christmas & New Year with the enchanting smell of the holidays encompassing here and there. 

There are only serveral working days in 2015. Pls take the remaining lucky time of 2015 to place orders. We arrange the fast production for you during your holidays and you will have enough stock to meet more customers' demands in the new year 2016. We always would love to work harder for your increasing business. 

Pls email or call us without hesitation. Let's cherish 2015 and welcome 2016 together.~ @ ~ 

Good news to share with  our esteemed Kingtronics customers. A brand new colorful inner carton is born silently.
This inner carton size is 18.5*7*18.5cm, which is suitable for all 7 inches reels packing.

We will gradually change the previous standard carton for below products to this colorful inner carton for all reel packing products.

Quartz Crystals and Oscillators

Didoes LL4148 and Zener Diodes BZV55 Series
LKT Series Chip Multilayer Ceramic Capacitors 
HKT Series High Voltage Chip MLCC Capacitors 
CKT Series Chip Tantalum Capacitors
EKT Series Low ESR Chip Tantalum Capacitors

See more about Kingtronics Packing information, please check below links:

Different types of diodes have different parameters.We must understand the following main parameters:

4. Reverse Current

Diode reverse current is at a temperature and a predetermined maximum reverse voltage is applied, current flows through the diode reverse. The smaller the reverse current, the conductive performance of the tube in one direction, the better. It is noteworthy that the reverse current and temperature are closely related, the temperature is increased by about 1 0 ℃, the reverse current increases doubled. For example 2APl type germanium diode, at 25 ℃, the reverse current of 250μA, the temperature rises to 35 ℃, reverse current will rise to 500μA, at 75 ℃, its reverse current has reached 8mA, not only lost a single direction of the conductive characteristics, the tubes will overheat and damage. Than the germanium diode silicon diode has good stability at high temperatures.

5. Reverse Recovery Time

From the forward voltage becomes a reverse voltage, ideally instantaneous cut-off current can, in fact, there are generally a little time delay. Determine the amount of current cut-off delay, that is the reverse recovery time. Although it directly affects the switching speed of the diode, but not necessarily say that this value is small enough.

6. Maximum Power

Maximum power is applied across the diode voltage multiplied by the current flowing. This limit is especially important parameter for regulator diodes.

For more products information please check:

Do you know that Kingtronics produce diodes and transistors? They are widely used on TV receiver.

Do you need more competitive prices for cost down? We only supply high-quality parts and always compete with MCC, MIC, NXP, Fairchild, TWS....

Below pls check and welcome to send us RFQs. We always look forward to becoming your stable business partner!

Diodes rectifier:

M7 DO-214AC T&R RoHS  SPQ:5kpcs/reel      7kkpcs stock available
LL4148 LL-34 T&R RoHS    SPQ:2.5kpcs/reel   5kkpcs stock available
BZV55C10V LL-34 T&R RoHS   SPQ:2.5kpcs/reel


BC817-40 SOT-23 T&R RoHS   SPQ:3kpcs/reel
BC807-40 SOT-23 T&R RoHS   SPQ:3kpcs/reel

Different types of diodes have different parameters.We must understand the following main parameters:

1. Rated Forward Current

Rated forward current diode means T for long-term continuous permissible maximum forward current through. Because the current through the heating tubes will die, the temperature rises, the temperature exceeds the allowable limit (silicon tube of about 1 40 , germanium tube is about 90 ), the die will cause overheating and damage. Therefore, do not use more than diode forward current diode rated value. For example, the commonly used lN400l type germanium diode forward current rating of  lA.

2. Maximum Surge Current

The maximum inrush current is allowed to flow through the excess forward current. It is not a normal current, but the current moment, this value is typically about 20 times the rated forward operating current.

3. Maximum Reverse Voltage

Applied reverse voltage across the diode high music to a certain value, the tube will breakdown, loss of unidirectional conductivity. To ensure safely use, it provides maximum reverse voltage. 
For example, lN400l diode reverse voltage reverse voltage 50V, lN4007 for l000V.

For more products information please check:

Dear Valued customer

Good day. Pls check below our Holiday schedule.

1>Christmas holiday will be from 25th December to 27th December 2015.

2>CNY holiday will be from from 8th February to 10th February 2016.

During Christmas & CNY vacation, if you have any questions, please feel free to send email to us. We will reply you as soon as possible when we come back.

Kingtronics team wish you Merry Christmas and Happy New Year.

For all the inconvenience, we apologize first ,and hope you will understand.

1. Do you buy Passive Components? If yes, are there any problems you're facing? Like quality, price, package and L/T...
    Passive Components including trimmer, Quartz Crystal, radial / dipped type for MLCC and tantalum capacitors. We produce these parts.

2. We're ISO 9001:2008 manufacturer since 1990. Maybe we can help you solve above problems. 
    a. Quality is very good. With ISO, UL & SGS approval.
    b. Prices are competitive on the market, maybe not the lowest, but it costs our valued products.
    c. Good package & Fast delivery time.

3. We also sell our parts to Newark Farnell (Element 14), Avnet Abacus, Compel, YE International...

4. Different from other suppliers, our service is very good, enjoy good reputation on the market. 
    We show our products in Munich Electronica, Moscow Expo Electronica, Brazil FIEE, HK Asia Electronica.

5. Below is our Passive components we produce, kindly please check if you have inquiry for us.

MKT: Radial multilayer ceramic capacitor.

LKT:  Chip multilayer ceramic capacitor

HKT:  High voltage multilayer ceramic capacitor

TKT:   Dipped tantalum capacitor.

CKT:  Chip tantalum capacitor

RKT:  Trimmer potentiometer 3296 3006 3386 3266 3362 3329 3590S SMD C3305...

QKT:  Quartz Crystal HC49S, HC49U, HC49SMD.

Trimming-potentiometers, cermet trimmer  (Cross to Bourns, Murata, Tocos, Vishay, BI technology)

Output 5KKpcs/month, more than 20 years' production experience 

Good quality and free samples are available for quality test

L/T: 3-5 weeks for common items

ISO & SGS certified &  RoHS compliant 

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
Skype: kingtronics.sales


Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Meet Kingtronics in Moscow soon
Convention and Exhibition Centre,HongKong
Date: 13-16 October, 2019
Booth No.: 5G-C26

Meet Kingtronics in Munich soon
New Munich Trade Fair Centre, Germany
Date: 10-13 November, 2020
Booth No.: To be advised