Kingtronics Blog

DB101S THRU DB107S
Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 1.0 Amperes

FEATURES
◆Ideal for printed circuit board
◆Reliable low cost construction technique ,results in inexpensive product
◆High temperature soldering guaranteed:
260  / 10 seconds / 0.375” ( 9.5mm ) ℃ ,lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347214

Bridge rectifier DB107S has a very large comsumption in the industrial manufacturing. Do you use them or do you have friends who are looking for it? Kindly pls consider us. our bridge rectifier is UL approved. We can provide you free samples for quality testing.

If you have related order/inquiry on hand, pls dont hesitate to contact me via sales2@kingtronics.com I will reply you soon. Thanks in advance.
 

Our Kingtronics is ISO Manufacturer with two factories, we have more than 20years experience for producing diode, bridge recitifier, potentiometer, capacitors...Our components got approval with ISO, SGS and UL certifications. 　
Do you buy diode and bridge rectifier? Here I would like to share with you our good offer.
 
Bridge rectifier offer
DB107S  DBS   50pcs/Tube     RoHS   with UL approved  US$0.0492/pc 
MB10S     MBS  2500pcs/Reel  RoHS    with UL approved  US$0.0432/pc
 
DB107S datasheet: http://www.kingtronics.com/pdf/DB101S-DB107S.pdf
MB10S   datasheet: http://www.kingtronics.com/pdf/MB2S-MB10S.pdf
 
Diode rectifier offer
Diode rectifier M7 DO-214 AC T&R RoHS  
Diode LL4148 Mini melf T&R RoHS
 
More diode and bridge rectifier offer:
Diode rectifier:  Diode M7, LL4148, S1M, GS1M, SM4007, UF4007, 1A7, 6A10, 1N4937, 1N5343B...
Bridge rectifier: DB107, MB10S, KBL410,  KBPC2510,  KBPC3510,  GBU410, GBJ810...
Zener diode:     BZV55C, BZX55C, BZX84C, BZX85C, 1N4727A-1N4761A, ZM4728 ~ZM4761, ZMM1 thru ZMM75

You can visit our website for more details: www.kingtronics.com
If you have inquiry please send to Olivia: sales1@kingtronics.com

My dear friend, wish you have a nice day!
 
Do you use or buy bridges? Here I introduce you our strongest item--DB107S. It has most competitive price and very quick delivery.
 
More important, our bridge is UL certified which many Taiwan  suppliers dont have. Kindly pls check following materials and inform if you have inquiry/order for us.
 
FEATURES；
◆Ideal for printed circuit board
◆Reliable low cost construction technique
   results in inexpensive product
◆High temperature soldering guaranteed:
   260  / 10 seconds / 0.375” ( 9.5mm ) ℃ 
   lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347214
 
It is well known that bridges can be used in many fields such as PCB(printed circut board), amplifier, speaker, player.... Do you have any friends who manufacture these products?
 
Kindly pls help me to promote to them. I believe our good L/T and excellent quality will make your business more smooth and successfull.
 
Any inquiry/order, pls feel free to email to sales2@kingtronics.com. We will reply you instantly.
 

My dear friend, how has your work been going lately? We will be exhibiting at Expo Electronica this April, and I’m looking forward to the opportunity to meet with you in person there! 😊

This will be my first time attending such an event, and I’m really excited! Do you have any recommendations for delicious food or beautiful resorts in the area? I’d greatly appreciate any advice you have to offer.

Recently, we've been receiving many orders for the following diodes and bridge rectifiers. Do you have any inquiries for me? These are our strong products, and we have both ISO and UL certifications. Kindly help me promote these items to your customers!

Our popular items:

• LL4148 LL-34 T&R RoHS
• M7 DO-214AC T&R RoHS
• S1M SMA T&R RoHS
• BZV55C Zener Diode Minimelf RoHS
• Kt Bridge Rectifier: MB10S MBS T&R RoHS
• Kt Bridge Rectifier: DB107S DBS Tube RoHS
• Kt Bridge Rectifier: KBL410 KBL Bulk RoHS

Please feel free to get back to me when you have an inquiry or order, and I will provide you with great prices. I look forward to doing business with you!

For any inquiries or sample requests, kindly email us at sales2@kingtronics.com.

https://www.kingtronics.tw/
http://www.kingtronics.com
http://www.m7diode.com/

May I share with you this market information, I found these bridge rectifier have big demand, MB10S, MB5S, DB107S, DB105S, KBL406, KBPC3502. These are very popular.

Do you have any inquiry for bridge rectifier, our prices are very good, lead time is 3-5 weeks. And more important, we are ISO manufacturer, and we have UL certifications for bridge rectifier.

DB101S - DB107S，MB2S - MB10S， DB101-DB107，KBL4005-KBL410, KBU6005-KBU610, KBPC25005-KBPC2510, KBPC25005W-KBPC2510W, KBPC35005-KBPC3510，KBPC35005W-KBPC3510W. 
 
DB157, KBP2005, KBU410......etc   more part number on website

As we have noted , the purpose of the rectifier section is to convert the incoming ac from a transformer or other ac power source to some form of pulsating dc. That is, it takes current that flows alternately in both directions as shown in the first figure to the right, and modifies it so that the output current flows only in one direction, as shown in the second and third figures below.

The circuit required to do this may be nothing more than a single diode, or it may be considerably more complex. However, all rectifier circuits may be classified into one of two categories, as follows:

Half-Wave Rectifiers. An easy way to convert ac to pulsating dc is to simply allow half of the ac cycle to pass, while blocking current to prevent it from flowing during the other half cycle. The figure to the right shows the resulting output. Such circuits are known as half-wave rectifiers because they only work on half of the incoming ac wave.

Full-Wave Rectifiers. The more common approach is to manipulate the incoming ac wave so that both halves are used to cause output current to flow in the same direction. The resulting waveform is shown to the right. Because these circuits operate on the entire incoming ac wave, they are known as full-wave rectifiers.

Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We are ready to respond each of your enquiry fastly and professionally .

A bridge rectifier is a tool used to rework alternating present (AC) into direct current (DC). Moreover, a bridge rectifier is utilized in model railroads to supply the correct direct current to run the motors and other accessories. Placed within the decoder, the bridge rectifier has many functions.

*Kingtronics Kt bridge rectifier present many N-channels which suggests that the facility inputs and the detrimental output of the rectifier are well connected.

* Kingtronics Kt bridge rectifier present a multiplicity of P-channel which implies that there’s a connection between each energy inputs and the output of the rectifier.

* Kingtronics Kt bridge rectifier facilitate third quadrant operation gate voltage management which implies that for mentioned multiplicity of stated N-channel MOSFET means and stated multiplicity of mentioned P-channel signifies that includes at the very least a component to assure fast MOSFET turn off.

With a purpose to operate the railroad, generate the minimal warmth required and get the highest present capacity, you want to configure the bridge rectifier. Via a diode, the mentioned part turns off the fast MOSFET. Kingtronics Bridge Rectifiers include: DB101-DB107,DB101S-DB107S,MB2S-MB10S，KBL4005-KBL410,KBU6005-KBU610,KBP2005-KBP210,GBU4005-GBU410,GBJ6005-GBJ610, KBPC25005-KBPC2510,KBPC25005W-KBPC2510W,KBPC35005-KBPC3510,KBPC35005W-KBPC3510W.

SURFACE MOUNT GENERAL RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere

FEATURES

◆The plastic package carries Underwriters Laboratory

Flammability Classification 94V-0

◆For surface mounted applications

◆Low reverse leakage

◆Built-in strain relief,ideal for automated placement

◆High forward surge current capability

◆High temperature soldering guaranteed:

250℃/10 seconds at terminals

MECHANICAL DATA

Case: JEDEC DO-214AC molded plastic body

Terminals: Solder plated, solderable per MIL-STD-750,Method 2026

Polarity: Color band denotes cathode end

Mounting Position: Any

Weight:0.003 ounce, 0.093 grams

Tel: 86 769 8118 8110

www.kingtronics.com

skype: kingtronics.sales2

email (msn): sales4@kingtronics.com

ISO 9001: 2008 manufacturer

UL Approval ; SGS certified

Strong products:

Diode M7 S1M LL4148 BZV55C, Bridge rectifier

Radial mlcc capacitor, dipped tantalum capacitor, Trimming potentiometers

If you need bridge rectifier, please contact kingtronics. We are a manufacture with owm brand kingtronics with ISO certification.

Kingtronics offer a wide range of diode and bridge rectifier, our UL certification is available.　

please check some of our popular part number like DB107, MB10S, KBL4005，KBU610, KBPC2510, do you have any request about mentioned products?

Find product feartures for Single Phase Bridge Rectifiers DB107 Tube RoHS:

Ideal for printed circuit board

Reliable low cost construction technique

results in inexpensive product

High temperature soldering guaranteed:

260 / 10 seconds / 0.375” ( 9.5mm )℃

lead length at 5 lbs., ( 2.3 kg ) tension

Hope you can take a few minutes to visit our website, you can find very good pictures and details of our products with our trade mark Kt, kingtronics.

And more other products informations on our website: www.kingtronics.com , maybe you can find some products you need.

Manufacturer:Kingtronics ISO 9001: 2008 manufacturer

Part Number:DB107S

Manufacturer Part No:DB107S

RoHS Compliance : Yes

Description

• Bridge Rectifier, Single, 1A, 1000V, DBS
• No. of Phases:Single
• Repetitive Reverse Voltage Vrrm Max:1kV
• Forward Current If(AV):1A
• Forward Voltage VF Max:1.1V
• Diode Mounting Type:Surface Mount
• RoHS Compliant: Yes

www.kingtronics.com