Kingtronics Blog

Stop-Clutch: (SC)
A device which allows the wiper to idle at the ends of the resistive element without damage as the adjustment shaft continues to be actuated in the same direction.

Stop-Solid: (SS)
A positive limit to mechanical and/or electrical adjustment.

Stacking:
The mounting of one trimming potentiometer adjacent to or on top of another utilizing the same mounting hardware.

Theoretical Resolution :
(Wirewound only) The theoretical measurement of sensitivity to which the output ratio may be adjusted and is the reciprocal of the number of turns of wire in resistance winding expressed as a percentage.
N = Total number of resistance wire turns.
1/N X 100 = Theoretical resolution percent

Printed Circuit Terminal: (P, W&X)
Rigid uninsulated electrical conductor so arranged, suitable for printed circuit board plug-in.

Solder Lug Terminal: (S)
Rigid uninsulated electrical conductor so arranged, suitable for external lead attachment.

Wiper: (SL)
The wiper is the member in contact with the resistive element that allows the output to be varied with the mechanical member adjustment.

AKT is short for axial multilayer ceramic capacitors, which is widely used on wiper and cooling fan. Do you have relevant inquiries for us?

We have 1 production line for this axial mlcc capacitor and our monthly output is 2,000,000pcs. Below details for your reference. Look forward to your kind reply.

Capacitance range: 1pF~1µF
Voltage range: 50V~100V
Temp range: NPO, X7R, Y5V

Competitors: AVX, Vishay, Kemet, Murata, TDK, NIC, Nippon, Panasonic

Multiturn Adjustment : 
Requires more than 360° mechanical adjustment to cause the wiper to traverse the total resistance element.

Terminal : 
An external member that provides electrical access to the resistance element and wiper.

Leadwire Type: (L)
Flexible insulated conductor.

With the business growing demand of our company's performance, in order to give our customers better service, our company expand the positions for sales recruitment. Hope our improvement can make you more satisfied with our after-sales service.

Thank you very much for all of our customers' great support all the way. Wish all of us a wider future with sustainable development.

Kindly pls pay attention to our further notice on 2016 exhibition in Munich, Germany!

Resistance Element :
A continuous, unbroken length of resistive material without joints, bonds or welds except at the junction of the element and the electrical terminals connected to each end of the element or at an intermediate point such as a center tap.

Adjustment Shaft :
The mechanical input member of a trimming potentiometer which when actuated causes the wiper to traverse the resistance element resulting in a change in output voltage or resistance.

Single Turn Adjustment :
Requires 360° or less mechanical input to cause the wiper to traverse the total resistance element.

For more products information please check: http://www.kingtronics.com/trimming-potentiometers/

You may have received our Kingtronics Christmas Cards in the past few years, with appreciation for your business,so we would like to make something special this year,haha.O(∩_∩)O~

Pls see below photos about our Kingtronics 2015 Chrismas Cards.It is designed and made by ourselves.When you receive our cards, hoping you will like it.

Our wishes come to you with the flying snow and this Christmas Card. May you be happy at Christmas and always.

For more products information please check: http://www.kingtronics.com/

Trimming Potentiometers:
An electrical mechanical device with three terminals. Two terminals are connected to the ends of a resistive element and one terminal is connected to a movable conductive contact which slides over the element, thus allowing the input voltage to be divided as a function of the mechanical input. It can function as either a voltage divider or rheostat.

Wirewound Trimming Potentiometer:
A trimming potentiometer characterized by a resistance element made up of turns of wire on which the wiper contacts only a small portion of each turn.

Non- Wirewound Trimming Potentiometer:
A trimming potentiometer characterized by the continuous nature of the surface area of the resistance element to be contacted. Contact is maintained over a continuous, unbroken path. The resistance is achieved by using material compositions other than wire such as carbon, conductive plastic, metal film and cermet.

For more products information please check：http://www.kingtronics.com/trimming-potentiometers/

Power management refers to how to effectively allocated to the power supply system of different components. Power management is very important to rely on battery power of mobile devices. Power management technology also called power control technology. It belongs to the category of power electronic technology. Nowadays it has been widely applied to industry, energy, transportation, information, aerospace, defense, education, culture, and many other fields.

Our diodes and bridge rectifiers can be used for power management. 
For more products information please check: http://www.kingtronics.com/bridge-rectifiers/

The combination of proprietary cermet element technology, precious metal brush contacts and swaged pin element connections used in BI trimmers permits the manufacture of precision, high quality trimmers that span the resistance range from 10 ohms to over 5 megohms. The small size and planar construction of these trimmers minimize stray circuit reactances and permit the trimmers to perform well in many high frequency applications.

Leadscrew
Precision brass leadscrew cuts its own grooves in the teflon rotor so that the operation of the rotor is free of backlash. Setability is excellent.

Sealing Grooves
Leadscrew has specially cut grooves to ensure a watertight seal.

Ceramic Substrate
High density substrate provides an excellent base for the element and is a good conductor of heat.

Cermet Element
BI’s proprietary cermet element matches the materials in the wirebrush so that CRV is minimized and the high temperature setability is excellent.

Swaged Pins
BI’s pin connections, which are swaged to the substrate, are free of solder and maintain high conductivity with time and temperature cycling.

Learn more: http://kingtronics.com/