#Passive Components #Capacitors #Poly - MKT - Mono - X2 Capacitors #Class X2 Capacitors Mains Suppression
FKT-MX MKP-X2 class Metallized Polypropylene Film Capacitor hot sell size:

 

FKT-MX--X2 Metallized Polypropylene Film capacitor

1

0.1uF 310VAC +/-10% P:10mm 13*12*6mm Bulk RoHS

2

0.1uF 310VAC +/-10% P:15mm 18*11*5mm Bulk RoHS

3

0.22uF 310VAC +/-10% P:15mm 18*12*6mm Bulk RoHS

The PCB is prone to bending and warping when it passes through the reflow furnace, which makes people very distressed. So how to prevent PCB board from bending and warping through the reflow furnace? Let's explain it to you:

1.Reduce the influence of temperature on PCB stress
Since "temperature" is the main source of plate stress, as long as the temperature of the reflow furnace is reduced or the heating and cooling rate of the plate in the reflow furnace is slowed down, the occurrence of plate bending and plate warping can be greatly reduced. However, there may be other side effects, such as solder short circuit.

2.Use high Tg plate
Tg is the glass transition temperature, that is, the temperature at which the material changes from glass to rubber. The lower the Tg value of the material, the faster the plate begins to soften after entering the reflow furnace, and the longer the time to become soft rubber, the more serious the deformation of the plate. The use of plates with higher Tg can increase their ability to withstand stress and deformation, but the price of materials is relatively high.

3.Increase the thickness of the circuit board
In order to achieve the goal of thinner, many electronic products have left 1.0mm, 0.8mm and even 0.6mm thick plates. It is really a bit difficult to keep the plates from deforming after the reflow furnace. It is suggested that if there is no requirement of thinner, the plates can preferably use 1.6mm thick plates, which can greatly reduce the risk of bending and deformation.

4.Reduce the size of circuit board and the number of panels
Since most of the reflow furnaces use chains to drive the circuit board forward, the larger size of the circuit board will be dented and deformed in the reflow furnace because of its own weight, so try to put the long side of the circuit board on the chain of the reflow furnace as far as possible, which can reduce the dented deformation caused by the weight of the circuit board itself. This is also the reason for the reduction of the number of panels, Try to use the narrow edge perpendicular to the direction of furnace passage to achieve the minimum concave deformation.

5.Used reflow carrier
If the above methods are difficult to achieve, the last is to use the reflow carrier/template to reduce the deformation. The reason why the reflow carrier can reduce the bending and warping of the plate is that the template is expected to hold the circuit board until the temperature of the circuit board is lower than the Tg value and begins to harden again, and can maintain the original size..

If the single-layer template cannot reduce the deformation of the circuit board, it is necessary to add another layer of cover to clamp the circuit board with the upper and lower layers of templates, which can greatly reduce the deformation of the circuit board through the reflow furnace. However, the template is very expensive, and it has to be placed and recycled manually.

6.Use Router instead of V-Cut
Since V-Cut will destroy the structural strength of the panels between the circuit boards, try not to use the sub-panels of V-Cut or reduce the depth of V-Cut.

Kingtronics Components to use on your board:
GKT-Aluminum Electrolytic Capacitors, radial, axial, SMD, snap-in, Lug, screw types
Bridge Rectifiers: MB1S-MB10S, KBPC6005-KBPC610, KBP2005-KBP210
Diodes & Transistors: M7, 1N4007, LL4148, BZV55C, Fast Recovery Diodes
DKT-Super Capacitors: 2.7V, 3V Radial, Snap-in, Screw Type and 5.5V Coin Type
MLCC and Tancap: Multilayer Ceramic Capacitors and Tantalum Capacitors
KKT-Ceramic Capacitors: SMD 3mm Trimmer Capacitor 3pF, 6pF,10pF, 20pF, 30pF
RKT-Trimming Potentiometers: Rectangular, SMD, Square 3006, 3362, 3386, 3590
QKT-Crystals: Crystals and Oscillators size 1612 to 7050,Tuning Fork 32.768KHz
SKT-Surge Arresters: Axial and SMD Gas 2-Electrode and 3-Electrode Arresters
NKT-NTC Thermistors: NTC Negative Temperature Coefficient Thermistor
XKT-Varistors: Metal Oxide Varistor 05D, 07D, 10D, 14D, 20D
WKT-Switches: DIP and SMD Tact Switches
FKT-Film Capacitors: Metallized Polyester and Polypropylene Film Capacitor

 

Kingtronics newly compiled passive components full Range Catalog, including our HOT best seller product with excellent quality and price.

Welcome check & contact Kingtronics sales team for further best quotation.    info@kingtronics.com
Kingtronics passive components full Range Catalog : https://www.kingtronics.com/pdf/Kingtronics-passive-part-full-Range-Catalog.pdf
Kingtronics youtube channel for more product information : https://www.youtube.com/c/Kingtronicskt

☆Aluminum Electrolytic Capacitor—GKT:
Polymer Solid type, Radial Type, SMD Type, Axial Type, Snap-in, Lug and Screw Type

☆Super capacitor—DKT:
Coin-type, Radial type, Snap-in and Screw Type, Combined Type (Double Layer)

☆Film capacitor—FKT:
Box Type Metallized Polyester Film Capacitor, Polypropylene Film Capacitor, X2 Metallized Polypropylene Film Capacitor

☆SMD 3mm Chip Ceramic Trimmer Capacitor--KKT

☆Multilayer Ceramic Capacitors
MKT-Radial Type,
AKT -Axial Type,
LKT -SMD Type Low Voltage
HKT -SMD Type High Voltage
BKT -SMD Type High Q Low ESR RF

☆Tantalum Capacitors
TKT -Radial Type
CKT -SMD Type
EKT -SMD Type Low ESR
PKT -SMD Type Solid Polymer

More information about our super capacitors have been collected as below to help our customers learn our parts well.
Kingtronics best support is waiting for you. :-)
https://www.kingtronics.com/Super-Capacitors/index.html

Applications:
1.RAM, Detonator, car recorder, smart meter, vacuum switch, digital camera, motor drive, clock circuit, UPS, toy, program-controlled switch, etc
2.Battery + EDLC (as power assist), water meter, gas meter, smart meter (as motor driven), wireless equipment (as power assist), pulse power application, industrial equipment, motor drive (high current discharge), Tax Controller, Barcode Scanner, Handy terminal, GPS. Digital camera, container tracking system, RAM, Detonator, Vacuum switch, program-controlled switch, car recorder, clock circuit, UPS, toy
3.Smart Meter :smart electricity meter, smart water meter, smart gas meter
Car Electronics: car audio, ETC systems, driving recorder.
IoT 5G: smart TV, smart refrigerator, smart electronic door
 

We have to look at several factors that created this shortage tsunami that blindsided everyone. We have broken them down into the following: supply, demand, unfortunate events, and poor decision-making.

Surge in Demand
When Covid-19 restrictions rolled out worldwide, stay-at-home mandates were the norm to prevent the transmission and spread of the virus. Everyone shifted to work from home setups, businesses went online, and messaging applications were downloaded immediately. Consequently, demand for additional electronic gadgets skyrocketed. People upgraded their laptops, purchased new desktops, more tablets, etc., to meet the requirements of the current situation.

This bottlenecked supply chains, as retailers did not prepare for the sudden increase in demand for new requirements. Add the existing projects in their pipelines, and you have the perfect recipe for a global semiconductor disaster.

Bad Luck
Aside from facing COVID-related challenges, some of the biggest foundries in the world were hit by a series of unfortunate events that disrupted their production process even more.

On March 19, an electric overload burned down 600 square meters of the Renesas plant in Naka, one of the most prominent players in the global chip market. It destroyed 23 machines and rendered other areas in the facility temporarily unfit for use.

The plant was running to total capacity again by June, but the damage has been done.

In Taiwan, the worst drought in recent memory threatened to make the chip shortage even worse. Producing chips require tremendous amounts of water, which the drought is making impossible to do. In Texas, winter storms forced some of the country’s only chip plants to stop production.

Still, there are only a handful of big chip manufacturers globally, making the semiconductor industry more vulnerable.

Due to the material shortage and increase demand of SMD 3mm Chip Ceramic Trimmer Capacitor.
Lead time for SMD 3mm Chip Ceramic Trimmer Capacitor may up to 4-36 weeks especially for the small Capacitance.

If you are looking or using this capacitor, please consider to place the order earlier to avoid the shortage in the future.
Kingtronics offer following SMD 3mm Chip Ceramic Trimmer Capacitor to fulfill customer need.

⨀Applications
►Remote Keyless Entry System, Measuring Instrument
►Car Alarm Remote Controller, Car Audio, Traffic Card Reader
►Security System, Wireless Microphone
►Cordless Phone, Wireless Repeater
►Two-Way Radio Communication (FRS, GMRS, LMR)
►TCXO, VCXO, RF Module, RFID, DVD

Contact our sales to have best offer!

Kingtronincs P/N

Capacitance(pF MAX)

Colour

KKT303TR

3PF

Black

KKT306TR

6PF

Blue

KKT310TR

10PF

Ivory

KKT320TR

20PF

Pink

KKT330TR

30PF

Green


Kingtronics-Demand exceeds supply for the SMD 3mm Chip Ceramic Trimmer Capacitor

In 2021, we meet a serious challenge about material supplies problem.

There are more and more strict rules between our cooperation with material suppliers.
Under the material shortage situation in the market, we have no choice but just accept ~

We just be informed that there will be a new round of increased price for Aluminum electrolytic capacitor material very soon.
If you have any demand, welcome to share earlier to enjoy current best support.

GKT-Aluminum Electrolytic Capacitor, radial, SMD, Axial, Snap-in, Screw, Lug type
https://www.kingtronics.com/aluminum-electrolytic-capacitors/

Kt Kingtronics Facing With Increasing Cost for Aluminum Electrolytic Capacitor Material

Do you know beside the Kingtronics official website and Blog, Kingtronics also share product news in social media?

If you do not want to miss our latest news. Follow us now and you will receive the latest update at the first moment.

https://www.linkedin.com/company/kt-kingtronics

https://kingtronicsinternationalcompany.wordpress.com/

https://twitter.com/Kingtronics

 https://www.youtube.com/c/Kingtronicskt


Official website in English: https://www.kingtronics.com/
Official website in Russian: https://www.kingtronics.com/russian/index.html
Official website in Portuguese: https://www.kingtronics.com/portuguese/index.html

Kingtronics-Follow Kingtronics from different Social Media today

#Supercap #Ultracap #Double Layer Capacitors

Feature:
Lead-free environmental protection
High current discharge
Supports 1 million cycles of use
Low leakage current, standard energy type
RoHS compliant
Ultra-low leakage current
Suitable for use with batteries

Common application:
It is widely used in the field of water, electricity, and gas and communication products. Battery + EDLC (as power assist), used for water meter, gas meter (as motor driven), wireless equipment (as power assist), pulse power application, industrial equipment (high current discharge)

DKT-DY
:http://www.kingtronics.com/pdf/DKT-DY-5V-7.5V-Combined-Type-Super-Capacitor.pdf

Kingtronics 5V-7.5V Combined Type Ultra Capacitor, also called Double Layer Capacitors – DKT-DY

Trimmer Ceramic capacitor is increasingly scarce in the market because of limited material supplies and rising demand.
Many customers are sharing order for their 2022 production schedule.

If you need them for your production in early 2022, it may be the right time to share your order now.

Applications:
Remote Keyless Entry System, Measuring Instrument
Car Alarm Remote Controller, Car Audio, Traffic Card Reader
Security System, Wireless Microphone
Cordless Phone, Wireless Repeater
Two-Way Radio Communication (FRS, GMRS, LMR)
TCXO, VCXO,RF Module, RFID,DVD

KKT303TR

KKT306TR

KKT310TR

KKT320TR

KKT330TR

3PF

6PF

10PF

20PF

30PF

Black

Blue

Ivory

Pink

Green


KKT-SMD 3mm Chip Ceramic Trimmer Capacitor
Kt Kingtronics Ceramic Trimmer Capacitor Support Your production

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com
YouTube: www.youtube.com/c/Kingtronicskt

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Archives

Calendar

<< 2024-5 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31