Mitsubishi Polyester Film offers a complete portfolio of film products to support the worldwide Mono Capacitors and ceramic casting markets. Hostaphan® polyester film is approved for use in high end ceramic applications as a release liner. Hostaphan® film is the leading choice of polyester film for ceramic casting world wide. The Hostaphan® product delivers the following superior product attributes:

  • Extremely smooth surface
  • Optimized shrinkage
  • Superior handling characteristics
  • Chemical resistance
  • Excellent flatness
  • Ultra thin, highly cured coatings
  • Controlled static levels
  • Manufactured in a clean environment

Mitsubishi Polyester Film products are typically used in electronics applications. Hostaphan® polyester film product categories for ceramic casting film are as follows:

  • Ceramic substrates
  • Solvent based multilayer ceramic capacitors (MLCC)
  • Water based multilayer ceramic capacitors (MLCC)

Imagine a perfectly innocent quartz crystal that has grown to considerable size. It is lying there, at the bottom of a shallow sea, when a meterorite rudely invites itself to crash into the Earth's surface with considerable noise, pressure, heat.

There is so much pressure and heat, in fact, that only a meteorite or asteroid can cause what happens next: the quartz is shocked!

Shocked quartz is quartz that has been subjected to an event that cannot happen from normal Earthly causes and which has had its very planar structure changed. The only two known causes of shocked quartz are nuclear explosions such as the Alamo field and the incredible impact forces of meteorites or ancient asteroids. The Pleistocene/Holcene astroid impact is one of the biggest culprits. This impact occured in North America about 12,000 years ago, creating a type of brecciated rock called impact breccia.

One aspect of the impact that creates shocked quartz, however, is that high heat is not involved, or the quartz would revert to its original structure. In some shocked quartz samples, the quartz resumed its normal growth pattern within a section of planar deformities.

Brecciated rock is like gravel that is cemented together in a finely grained matrix that may or may not have the same composition as the gravel. Impact breccia is formed through extra terrestial or nuclear impact and is generally found in or around impact craters.

Quartz crystals are said to be the second most abundant substance in the Earth's crust. They are composed of silicon-oxygen tetrahedra where one oxygen molecule is shared between each two tetrahedron. The crystals grow perpetually in a six sided prism that terminates in a six sided pyramid.

Shocked quartz crystals contained shocked lamellae, or small fractures that create lines in the quartz that go along the planes of the crystal.  These planes can usually only be viewed under a microscope. \

But often, special microscope techniques, such as electron microscope, high resolution transmission electron microscopy (TEM), Focused Ion Beam (FIB) tomography, cross polarization, reflected light, thin slicing and polishing are required before the microscopic deformations can be seen.

Sometimes, the deformations actually can be examined as if they were "pressure gauges", with various deformities helping to identify the amount of pressure that it would have taken to create them. New methods of examining the samples are being used, with goals of gathering more information and images of smaller and younger samples.

The most famous sites for such impact craters include the Chicxulub structure on the Northern Yucatan Penninsula of Mexico, the Bavarian Town of NÖrdlingen, Arizona, India, and generally in the K-3 boundary between Cretaceous and Tertiary rocks.

Diodes has announced the first device from a proprietary semiconductor process at its wafer fabrication facility in Oldham.

The device is a high efficiency 600V, 8A rectifier targeted at LCD-LED TV power supplies.

Called Diodestar, the process combines bipolar and mosfet semiconductor technologies in a high voltage process.

The first product fabbed on the new process is the DSR8V600, a 600V 8A rated rectifier, tailored for use as the boost diode in the power factor correction (PFC) circuits of single and dual stage switched mode power supplies (SMPS) up to 1,000W.

optimised for PFC duties in continuous and boundary conduction mode, this family of rectifiers will offer best in class soft recovery with ultra fast switching capability (TRR<30ns), meeting the requirements of the 80 Plus Energy Star standard for SMPS.

Tokyo, Oct 13, 2010 (JCN Newswire via COMTEX) -- Showa Denko K.K. (SDK) will expand nanoparticle titanium-oxide production capacity at its fully-owned subsidiary Showa Titanium Co., Ltd., from 180 tons a month at present to 240 tons a month as from June 2011. The product, sold under the trade name of Super-Titania(TM), is used in the production of multilayer ceramic capacitors (MLCC Capacitors).

MLCC Capacitors are used mainly in electronic devices that require small size and light weight, such as PCs and mobile phones, as well as in such digital electric appliances as flat-panel TVs. Reflecting increasing demand for these products, the MLCC market is expected to continue growing at around 10% a year.

Under the circumstances, Showa Titanium will enhance the efficiency of production facilities for Super-Titania for MLCC applications and increase the number of production lines from three to four.

Titanium oxide (TiO2) is used in the production of barium titanate (BaTiO3), which is then used as raw material for dielectric*, one of the basic components of MLCC Capacitors. Furthermore, to produce small and high-capacity MLCC Capacitors, it is necessary to obtain high-purity, fine-particle BaTiO3. While there are two different processes for the production of BaTiO3 (solid-phase and liquid-phase**), fine-particle TiO2 is required for the solid-phase process, which enables low-cost production of BaTiO3 with superior dielectric properties. As Showa Titanium uses the most advanced process control technology, the company can provide Super-Titania in ultra-fine particle sizes, ranging from 15 to 250 nm (1 nm:one-millionth of mm). The product also has high purity, ensuring the production of MLCC Capacitors with smaller size and higher capacity.

In addition to the MLCC application, Super-Titania is used in various fillers and photocatalysts. To meet diversified needs of customers, we will provide high-quality products in a stable manner, establishing our leading position on the market.

* Dielectric: A material which is an electrical insulator, having the capability to store electricity and to discharge electricity instantly. As its dielectric properties improve, dielectric comes to have higher capacity to store electricity.

** Solid-phase and liquid-phase: Processes for the production of fine ceramics, including BaTiO3. In the solid-phase process, materials are mixed, and baked at high temperatures, resulting in synthesis of compounds through chemical reactions. In the liquid-phase process, materials are dissolved in a solution and undergo chemical reactions. Then the materials are baked at low temperatures, and converted into compounds.

A potentiometer is an adjustable resistor. This is why some customers called potentiometer variable resistor. Resistor include fixed resistor and variable resistor. Variable resister (potentiometer) belongs to passive components. A potentiometer is constructed using resistive element comprising an arc of a circle and a sliding contact (wiper) travelling over that arc.

Potentiometer in different languages & different names & Different types:
Trimming Potentiometer, Trimmer, Potentiometer, Trimming Potentiometer, Trimming Potentiometer, Preset Potentiometer

Carbon Trimming Potentiometer, Cermet Trimming Potentiometer, SMD Trimming Potentiometer, Surface Mount Trimming Potentiometer, Through-hole Trimming Potentiometer, Multiturn Trimmer, Single-turn Trimming Potentiometer Wirewound Potentiometer, Precision Potentiometer

Potênciometros, POTENCIOMETRO MULTI-VOLTA, POT 3296, POT 3006, POT3386, Potencjometr, 3386 PRESET 1 VUELTA, Potencjometry, Потенциометр 3296, Potentiomètre, Potenziometer.

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
Skype: kingtronics.sales


Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download



<< 2024-2 >>