Kingtronics Blog

Trimmers come in a variety of sizes and precision levels. For example, multi-turn trim potentiometers allow for very high degrees of accuracy, as several turns of the adjustment screw are required to reach the end value.

Kingtronics offers a wide selection of Trimming Potentiometers, including models like RKT-3006 and RKT-3296, under our KT mark. You can be assured of the quality of our products, and we stand behind them with a guarantee of reliability.

If you're interested in our Trimming Potentiometers, please feel free to visit our website: www.kingtronics.com. If you have any questions or specific requirements, don't hesitate to contact us. We are committed to meeting your needs.

A typical surge arrester consists of disks made of zinc oxide material, sized in cross-sectional area to provide the desired energy discharge capability, and in axial length proportional to the voltage capability. These disks are placed in porcelain enclosures to provide physical support, aid in heat removal, and are sealed for protection from contamination in the electrical environment.

Kingtronics Surge Arresters

Kingtronics specializes in 2-Electrode Surge Arresters. We offer a wide variety of surge arresters to meet diverse electrical protection needs. For more information, please send your inquiry about our KT mark SKT-2R-230A2 surge arrester.

Kingtronics sales had sucessful exhibition at HK fair, our blue nice booth might leave you deeply impression, right? Please visit our blog to see our photos at HK fair: www.kingtronics.cn.

Do you buy 3-Electrode Surge Arresters and 2-Electrode Surge Arresters . Kingtronics produce Surge Arrester in our factory, lead time is short, prices are as competitive as our diode rectifier M7, everybody know Kingtronics rectifier M7, hehe.. More important, this products we don't have much competitors. Please send us inquiry for diode and surge arresters.

Our surge arresters can cross to Nisshin Electric and Epcos:

• SR3YP Series(ITU-T Standard): 3-Electrode Arresters
• SRYH Series(ITU-T Standard): 2-Electrode Arresters

BTW, our website www.kingtronics.com is updated, you can download part list of diode, cross reference of capacitors, Trimming Potentiometer, and SGS certifications from our website.

Tantalum is a key material in the electronics capacitor industry, representing approximately 68% of global demand. Its remarkable properties—high melting point, strength, ductility, reliability, resistance to corrosion, and thermal conductivity—make it an ideal and environmentally versatile choice for capacitors.

Tantalum capacitors are widely used in numerous electronic devices, including wireless devices, LCD monitors, DVD players, cell phones, personal computers, digital cameras, gaming platforms, telephone switchboards, and computer networks. Their unmatched capacity to store and release electrical charges ensures their critical role in the performance of these products.

Why Choose Kingtronics Tantalum Capacitors?

Kingtronics offers better lead times than major competitors like AVX, Kemet, and Vishay, providing fast delivery for your capacitor needs. We welcome you to send us your inquiries!

CKT: http://www.kingtronics.com/tantalum-capacitors/chip-tantalum-capacitors.html
TKT: http://www.kingtronics.com/tantalum-capacitors/dipped-tantalum.html

Multilayer Ceramic Capacitor (MLCC) are widely used electronic components that temporarily store electrical charge. As the most common type of capacitor today, MLCCs have evolved with the advancements in technology to meet the growing demand for miniaturization in modern electronics.

These capacitors are crucial in powering smaller devices such as cell phones, computers, digital still cameras (DSC), digital video cameras (DVC), and GPS systems—all of which require compact, high-performance components.

Kingtronics MLCC Capacitors: Unbeatable Quality and Value

In addition to chip MLCC capacitors, Kingtronics offers a superior range of radial MLCC capacitors (mono capacitors) that stand out in the market. Our radial MLCC capacitors are renowned for their:

• Competitive Pricing: Providing excellent value without compromising on quality.

• High Quality: Manufactured to the highest standards for reliable performance.

• Short Lead Times: Fast delivery to meet your production needs.

Kingtronics Shines at Hong Kong ElectronicsAsia 2010 Exhibition

From October 13th to 16th, Kingtronics participated in the Hong Kong ElectronicsAsia 2010 exhibition, marking a successful event where we had the opportunity to reconnect with long-time customers and meet new ones.

Learn more:http://www.kingtronics.com/

Mitsubishi Polyester Film offers a complete portfolio of film products to support the worldwide Mono Capacitors and ceramic casting markets. Hostaphan® polyester film is approved for use in high end ceramic applications as a release liner. Hostaphan® film is the leading choice of polyester film for ceramic casting world wide. The Hostaphan® product delivers the following superior product attributes:

• Extremely smooth surface
• Optimized shrinkage
• Superior handling characteristics
• Chemical resistance
• Excellent flatness
• Ultra thin, highly cured coatings
• Controlled static levels
• Manufactured in a clean environment

Mitsubishi Polyester Film products are typically used in electronics applications. Hostaphan® polyester film product categories for ceramic casting film are as follows:

• Ceramic substrates
• Solvent based multilayer ceramic capacitors (MLCC)
• Water based multilayer ceramic capacitors (MLCC)

Imagine a perfectly innocent quartz crystal that has grown to considerable size. It is lying there, at the bottom of a shallow sea, when a meterorite rudely invites itself to crash into the Earth's surface with considerable noise, pressure, heat.

There is so much pressure and heat, in fact, that only a meteorite or asteroid can cause what happens next: the quartz is shocked!

Shocked quartz is quartz that has been subjected to an event that cannot happen from normal Earthly causes and which has had its very planar structure changed. The only two known causes of shocked quartz are nuclear explosions such as the Alamo field and the incredible impact forces of meteorites or ancient asteroids. The Pleistocene/Holcene astroid impact is one of the biggest culprits. This impact occured in North America about 12,000 years ago, creating a type of brecciated rock called impact breccia.

One aspect of the impact that creates shocked quartz, however, is that high heat is not involved, or the quartz would revert to its original structure. In some shocked quartz samples, the quartz resumed its normal growth pattern within a section of planar deformities.

Brecciated rock is like gravel that is cemented together in a finely grained matrix that may or may not have the same composition as the gravel. Impact breccia is formed through extra terrestial or nuclear impact and is generally found in or around impact craters.

Quartz crystals are said to be the second most abundant substance in the Earth's crust. They are composed of silicon-oxygen tetrahedra where one oxygen molecule is shared between each two tetrahedron. The crystals grow perpetually in a six sided prism that terminates in a six sided pyramid.

Shocked quartz crystals contained shocked lamellae, or small fractures that create lines in the quartz that go along the planes of the crystal.  These planes can usually only be viewed under a microscope. \

But often, special microscope techniques, such as electron microscope, high resolution transmission electron microscopy (TEM), Focused Ion Beam (FIB) tomography, cross polarization, reflected light, thin slicing and polishing are required before the microscopic deformations can be seen.

Sometimes, the deformations actually can be examined as if they were "pressure gauges", with various deformities helping to identify the amount of pressure that it would have taken to create them. New methods of examining the samples are being used, with goals of gathering more information and images of smaller and younger samples.

The most famous sites for such impact craters include the Chicxulub structure on the Northern Yucatan Penninsula of Mexico, the Bavarian Town of NÖrdlingen, Arizona, India, and generally in the K-3 boundary between Cretaceous and Tertiary rocks.

Diodes has announced the first device from a proprietary semiconductor process at its wafer fabrication facility in Oldham.

The device is a high-efficiency 600V, 8A rectifier specifically targeted at LCD-LED TV power supplies.

Called Diodestar, the process combines bipolar and MOSFET semiconductor technologies in a high voltage process.

The first product fabricated using this new process is the DSR8V600, a 600V, 8A rated rectifier, designed for use as the boost diode in power factor correction (PFC) circuits of single and dual stage switched-mode power supplies (SMPS) up to 1,000W.

Optimized for PFC duties in both continuous and boundary conduction mode, the DSR8V600 rectifier offers best-in-class soft recovery with ultra-fast switching capability (TRR < 30ns), meeting the 80 Plus Energy Star standard for SMPS.